FINAL REPORT ♥

FINAL YEAR REPORT

Seri Nur Amirah binti Ramli

21DNS14F1034

Politeknik Balik Pulau

Diploma in Information Technology (Networking)

Thank you -

Welcome to my blog.
There is a lot of nostalgia here so bring along
my memory.
Click on the 9 puzzle pictures at the left
to navigate around my blog.

Index

Main Page

Front page

Acknowlegdment

Introduction Of Industrial Training

Company Background

Weekly Report

Technical Report

Finding and Recommendation

Conclusion,Appendix

CHAPTER 1 : THE INTRODUCTION OF INDUSTRY TRAINING

1.1 Introduction .

There a first thing need to contend of student is performed the industrial training as to fulfillment of requirement for the certificate and diploma. So for the first day an industrial training the student should a present to organization and acquaint himself to all staff in the organization. At the same time, the students wisely used the time for get a lot of knowledge and experience from their staff. For the every task should be accomplish with achieve a customer satisfaction. The first thing must be to learn for during this practical session are patience and acceptable all comment. Within in five month practical at the Alphawave Engineering (M) Sdn Bhd, there have a lot daily task and activity to be my performed. This is an activity during in five month practical.

1.2 Industrial Training Objective .

1. To expose the students to the real life working experience and expanding the knowledge in their specific field.

***All tasks given by the supervisor must be completed with sense of trustworthy and full responsibility. This attitude every important to ensure all business entrusted to students were carried out flawlessly. Also, it train the students to be honest not only to themselves but others as well.

2. To make use of the theory and learned in the polytechnic.

***Students are only exposed to the basic theory and needed in the fields of their own. These theory and were mainly according to the books. With the industrial training in place, students will experience real life situation in the field. This will make the students use their knowledge in order to get their works done.

3. To produce trustworthy workers with high responsibility and able to cooperate with other staffs.

***All tasks given by the supervisor must be completed with a sense of trustworthy and full responsibility. This attitude every important to ensure all business entrusted to students were carried out flawlessly. Also, it train the students to be honest not only to themselves but others as well.

4. Enhance student’s confidence at end of the training.

***When the industrial training students are exposed to variety of problems and had to face it. With the experience learned through industrial training , the students will be more confidence both in learning and working. High spirit and skills to overcome the problems faced certainly create a strong confidence in the students.

5. Learn to interact with superior officers.

***In this training, students get the opportunity to interact with upper management such as engineer, director and consultant and others. With this opportunity, student will be able to associate and discuss with them in a closer way. This opportunity will not come without the implication of industrial training. This opportunity should be used well by the students to learn more.

6. Increase the interest and curiosity.

***There will be many new things that students will face during the period of the industrial training. These events will enhance the curiosity in the students. Other than that, the real life exposure given to the students will also increase the interest of the students towards their fields of studies.

1.3 Report Objectives .

i. To provide a work document effectively.

ii. To produce students that are responsible for their work by providing enough evidential documents that related to work.

iii. To expose the students on how to provide a proper document to build self-confidence in the student while providing the document

iv. To complete the prerequisite for the student to pass industrial training Polytechnic.

1.4 Importance of Industrial Training .

1.4.1 Industrial training are important to the students in many aspects. This is because this module was created to give benefit to students, especially students who take up studies in polytechnic. Among the importance is:

i. To produce employees that are fully disciplined after they have graduated from the polytechnic This can be seen through the students who take part in the industrial training, they are not only bound to the rules set by the polytechnic but also rules fixed by the organization that students take their industrial training.

ii. To produce employees that are skill full and ready to work when they take their first step to the working world. This is because by involving in certain industrial training at the organization given to them, student will be more skillful in carrying out a job after they were explained on how to do the job by a more experienced co-worker.

iii. Student who went through industrial training will be more mature in conducting the works given to them.

iv. Students will also be more knowledgeable and understanding about matters related to their field of study, after the practical lessons.

Chapter 3 : WEEKLY REPORT

CONTINUE.....................

Week 13

Date: 20/02/2017 - 25/02/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Do TSSR for CA capacity

2. Drawing for CA capacity

3. Apply PTW for Reframing survey

4. Apply Digi permit

5. Apply manual PTW for CA upgrade

Knowledge / skills acquired (during the week):

1. Know how to do TSSR for CA Capacity

2. Drawing using AutoCAD

3. Learn about Digi permit

4. Understand about CA upgrade

The impact and effects on students :

1. Need more patient while drawing AutoCAD

2. Focus and understand a something new

COMPLETED BY INDUSTRY

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Week 14

Date: 27/02/2017 - 04/03/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Do TSSR for site maxis at Huawei company in KL central

2. Amend TSSR

Knowledge / skills acquired (during the week):

1. Learn about TSSR maxis

2. Do correction from TSSR amendment

The impact and effects on students :

1. Responsible submit report to Huawei

2. Self-confident most important

COMPLETED BY INDUSTRY

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Week 15

Date: 06/03/2017 - 11/03/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Do TSSR for site maxis at Huawei company in KL central

2. Amend TSSR

Knowledge / skills acquired (during the week):

1. Learn about TSSR maxis

2. Do correction from TSSR amendment

The impact and effects on students :

1. Responsible submit report to Huawei

2. Self-confident most important to do some work

COMPLETED BY INDUSTRY

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Week 16

Date: 13/03/2017 - 18/03/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Do TSSR for site maxis at Huawei company in KL central

2. Amend TSSR

3. Update tracker

4. Review TSSR from subcon

Knowledge / skills acquired (during the week):

1. Learn about TSSR maxis

2. Do correction from TSSR amendment

3. Update tracker every day and sent to Huawei

4. Check the TSSR it’s have wrong or not

The impact and effects on students :

1. Responsible submit report to Huawei

2. Be confident when submit report and tracker

COMPLETED BY INDUSTRY

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Week 17

Date: 20/03/2017 - 25/03/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Do TSSR for site maxis at Huawei company in KL central

2. Amend TSSR

3. Update tracker

4. Review TSSR from subcon

5. Email to Huawei for pending site

Knowledge / skills acquired (during the week):

1. Learn about TSSR maxis

2. Do correction from TSSR amendment

3. Update tracker every day and sent to Huawei

4. Check the TSSR for amend

5. Know how to email to Huawei for pending site survey maxis project

The impact and effects on students :

1. Responsible email to Huawei for pending site

2. Punctual submit report

COMPLETED BY INDUSTRY

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Week 18

Date: 27/03/2017 - 01/04/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Do TSSR for site maxis at Huawei

2. Amend TSSR for site survey DC Rectifier

3. Amend TSSR for site L26

4. Update tracker and sent to Huawei

5. Review TSSR from subcon

Knowledge / skills acquired (during the week):

1. Learn about TSSR maxis

2. Do correction from TSSR amendment

3. Update tracker every day and sent to Huawei

4. Check the TSSR for amend

The impact and effects on students :

1. Punctual submit the report

2. Alert with something problem

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Week 19

Date: 03/04/2017 - 08/04/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Amend TSSR for site survey DC Rectifier

2. Amend TSSR for site L26

3. Update tracker and sent to Huawei

4. Review TSSR from subcon

5. Install autocad at PC

6. Do site folder for celcom project (add capacity L26 )

Knowledge / skills acquired (during the week):

1. Learn about TSSR maxis

2. Do correction from TSSR amendment

3. Update tracker every day and sent to Huawei

4. Check the TSSR for amend

5. Learn about site folder from celcom project

The impact and effects on students :

1. Punctual submit the report

2. Alert with something problem

3. Learn a something new

COMPLETED BY INDUSTRY

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Week 20

Date: 10/04/2017 - 14/04/2017

COMPLETED BY STUDENT

Weekly activities carried out (briefly):

1. Amend TSSR for site survey DC Rectifier

2. Amend TSSR for site L26

3. Do drawing using autocad

4. Do site folder from celcom project for ATP

Knowledge / skills acquired (during the week):

1. Learn about TSSR maxis

2. Do correction from TSSR amendment

4. Check the TSSR for amend

5. Learn about site folder from celcom project for ATP

The impact and effects on students :

1. Punctual submit the report

2. Alert with something problem

3. Learn a something new

4. Confident to communicate with other people for more information

COMPLETED BY INDUSTRY

Comments / suggestions from industry supervisors:

Signature and stamp

Date:

Chapter 4 : TECHNICAL REPORT

4.1 Install Autocad.

1. Download AutoDesk from TigerWare.
2. Click Run from the Security Warning pop-up box that appears.

Security Warning pop-up with Run selected

3. Click Install, located in the bottom right hand corner of the dialog box to begin.

The pop up installation window

4. Read over the license and services agreement & click 'I Accept'.

5. Click Next.

License Agreement pop up

6. Select the Stand-Alone Option.

7. Enter your Serial Number & Product Key. (Both are provided by TigerWare.)

8. Click Next.

Product Information window

9. Select Install.

Installation window

10. Wait for the installation process to be completed. (BE AWARE: Due to the large size of this package, expect this process to take Several Minutes)

11. Click Finish.

Finished installation window

12. AutoCAD 2013 is now installed..

4.2 Share file using cable.

This connection will be made using a crossover Ethernet cable via the RJ45 ports.

1. Connect Two Windows Computers via LAN

2. The setup process for establishing a LAN connection is nearly identical for both users, but for clarity's sake, we have broken it down by user. User 1

3. User 1 will begin this process by heading to My Computer and clicking on Properties > Computer Name.

4. Change Computer name to A and the Workgroup name to ABC. Click on OK to save the changes.

5. Next, open the Control Panel and head to Network Connections. Right-click on the LAN connection and select Properties, followed by Internet Protocol (TCP/IP) > Properties.

6. Enter the following number into the field marked IP Address: 192.168.0.1. Next, enter the following into the field labeled Subnet Mask: 255.255.255.0.

7. All other fields should be left blank. Click on OK to save changes. User 2

8. Once complete, User 2 should open My Computer and head to Properties > Computer Name.

9. Change Computer name to B and Workgroup name to ABC. Click OK to save changes.

10. Next, go to Control Panel > Network Connections. Right-click on the LAN connection and select Properties, followed by Internet Protocol (TCP/IP) > Properties.

11. Enter the following number into the field marked IP Address: 192.168.0.2 . Next, enter the following into the field labeled Subnet Mask: 255.255.255.0.

12. All other fields should be left blank. Click OK to save changes. Establishing the Network Connection Once the connections and settings have been properly saved, both PCs should be connected by local network (this may require you to restart both computers). Check to see if the connection has been established by pinging each PC.
User 1 can ping User 2 by heading to Start > Run > CMD > ping 192.168.0.2.
User 2 can ping User 1 by heading to Start > Run > CMD > ping 192.168.0.1.
This local connection can now be used to play multiplayer games, or to share files. You can also map a drive on another computer to a local drive by heading to My Computer > Tools > Map Network Drive and selecting the drive letter and network path of the shared folder.

4.3 Remove shortcut virus from pendrive.

1. Open Command prompt as Administrator (Windows 8 or earlier: Windows key + R > Type CMD & ENTER, Windows 8: Search for “CMD” > Right click to CMD and Select “Run as Administrator” or right click over Start button and select “command prompt (Admin) “

2. Connect Your USB storage (Pendrive/SD card) to your Computer.

3. Scan your storage with your antivirus program (Not compulsory but its effective) > If your antivirus found virus then delete it.

4. Type in Command prompt : attrib -h -r -s /s /d :\*.* (See from My computer and then type it. For example, if your drive letter is “D” then the command is like: ” attrib -h -r -s /s /d D:\*.* “)

Shortcut files again convert to normal files. Delete unknown files from your storage after command process completes. I highly recommend you to after removing shortcut virus copy your USB data to your computer . Format the USB storage Then again re-copy USB data back.

CHAPTER 5 : FINDING AND RECOMMENDATION

While undergoing a 20 weeks of industrial training at Alphawave Engineering (M) Sdn.Bhd., there are a lot of new knowledge that I have learnt, regardless of the knowledge which related to our respective course. With the implication of industrial training, students get to experience the real nature of working environment. This enable students to instill certain a certain quality in them and can reduce nervousness. Other than that, by implementing industrial training, students were able to adapt oneself with problems that often faced by every employee, this will enable students to become more mature and can carry out the duty that was given to them with the best efforts. Everything that has been learned by the students while undergoing the industrial training will be useful to them when they reach their working days later in their life. Apart from that, there are also a few matters that need to be improved by either the Polytechnic or the firm or the company itself. Among the improvements that can be suggested are :

1. Implement the usage of English Language during lecture in class. The usage of English language is very important when working in the field that revolved around development because most of the business deals were carried out using English language. Most of the Polytechnic students are unskilled in speaking in English. For example, communicate with Huawei staff were usually carried out by using English language. So, to student that less skilled in that particular language, the matter of discussions in the meetings will not be understood by the students. This will affect the students learning experience. I hope that the management of the Polytechnic will stress more on the English language usage among students.

2. The managements of Polytechnic especially UPLI (Unit PerhubunganDan Latihan Industri ) should hold more visits to the place where trainees who were undergoing the industrial training as often as 2 or 3 times along the 20 weeks of training to monitor their development and to ensure that students are always on the watch and monitored at all-time.

3. The firm were supposed to understand students more. What does it mean by understand students more is that the firm should not give the student any work that they do not know without giving any guidance on how to do the work correctly and leave the students to figure it out by him/herself. This is because sometimes, the work that had been given was yet to be learned by the students, so, they need some guidance first before they can start working on the task that were given to them. Generally, by undergoing industrial training, students has been given valuable experience and the understanding on the relationship between what they had learned theoretically with what they need to do practically. However, during this industrial training period also, the students had been given the opportunity to adapt themselves with new discovery that usually are not learnt at polytechnic.

CHAPTER 6 : CONCLUSION

6.1 Student Declaration.

PENGESAHAN PELAJAR DAN PEMERIKSA PELAJAR

”Saya akui laporan ini adalah hasil kerja saya sendiri kecuali nukilan dan ringkasan yang tiap-tiap satunya telah saya jelaskan sumbernya.”

Tandatangan : ......................................................

Nama Pelajar : Seri Nur Amirah binti Ramli

No.Pendaftaran : 21DNS14F1034

Tarikh : 14/04/2017

PEMERIKSA ”Saya akui bahawa saya telah memeriksa laporan ini dan pada pandangan saya laporan ini adalah memadai dari segi skop dan kualiti bagi memenuhi sebahagian daripada syarat penganugerahan Sijil atau Diploma Politeknik Kementerian Pengajian Tinggi Malaysia.”

Tandatangan : .......................................

Nama & Cop Jawatan :

Tarikh :

6.2 Conclusion.

After undergoing a 20 weeks of industrial training at Alphawave Engineering Sdn. Bhd, there are a lot of new knowledge that can be learned and I get to understand altogether on how this firm plays an important role in industrial field, especially in documentation and network there used. Exposure that have been given to me by Alphawave Engineering Sdn.Bhd staff about the working and technical aspect is a very meaningful knowledge to me in order to prepare myself before stepping into the real work environment on the upcoming days. I hope with the implication of the Industrial Training, there will be no more anomalous feelings when the students started working after they have finished their course later. The staff at ALphawave Engineering Sdn. Bhd Are very helpful. They gave me a lot of exposure on the terms of reference and procedures related to the process of preparing site folder, maxis and celcom document, apply permit for work and act.

6.3 Appendix.

MAXIS PERMIT

CELCOM PERMIT

DHTI PERMIT

DIGI PERMIT

POLITEKNIK BALIK PULAU

DIPLOMA IN TECHNOLOGY INFORMATION AND COMMUNICATION

( NETWORKING)

NAME :

REGISTER ID:

INDUSTRY TRAINING :